Non Oxidizing Biocide Swimming Pool Cleaning Chemicals Algicide Efficient Environmentally Friendly

Product manual:
This product is an internationally recognized non-oxidizing algicide with broad spectrum, high efficiency, non-irritation and good stability. It has strong inhibition on common fungi and algae such as swimming pool, hot spring, sauna, spa bath, landscape water and so on. Kill the effect.

Features
1. This product is a non-foaming algaecide, safe and foam-free.
2, this product can be naturally degraded, non-toxic, harmless to the human body and the environment.
3. This product does not contain copper sulfate or complexed copper polymer. It has low concentration, long duration and good stability.
4, good solubility, completely miscible with water.
5, a wide range of use, no acid and alkali and water hardness requirements, its algae-killing effect has no effect.
6, there is a flocculation function, with the use of chlorpyrifos clarifying agent to use the clarification effect is better.

Precautions
1. Keep out of reach of children and do not take it orally.
2, should be well protected when using, pay attention not to direct contact with the skin, if you accidentally enter the eye, you can use a lot of water to rinse, should be sent to the hospital immediately.

Instructions
Dilute the product 1-5 times and evenly along the wall of the pool, slowly correct the draft or directly spill on the pool surface. After adding, please open the circulation system to evenly disperse the algae in the pool water to achieve the best results.
1, daily maintenance dosage: add once a week, add 1KG of this product per 1000 tons of pool water.
2. New opening dosage: Add 2KG of this product per 1000 tons of pool water.
3. If there is obvious algae growth in the swimming pool, the algae should be thoroughly cleaned and then used with algaecide. The dosage is 2-3 times of normal maintenance.

Validity period: two years